CycleSafe® Product Range

EcoPark® Series - a freestanding system suitable for most applications.Constructed with CycleSafe's CMC composite doors and roof segments, with 16 gauge reinforced sheet metal side panels. EcoPark lockers can be installed as a single unit or multiple units can be aligned in a variety of configurations to meet your site requirements.

ProPark® Series – an interlocking modular system suitable for the highest risk areas.  Fully constructed with CycleSafe's CMC composite doors, roof and side panels to provide the ultimate in bicycle security.


Product Features and Comparison

EcoPark

ProPark

SMC composite door and roof construction

SMC composite side panels

16 gauge zinc primed TGIC powder coated side panels

Integral ribbing to maximise strength and stiffness

Integral UV and Graffiti resistant coatings

ABLOY Executive locking mechanism (best available)

Chicago Ace II locking mechanism (very good)

High security full length door latch system

Minimal thermal conductance

Re-locatable and expandable

Height and levelling adjustments

1 or 2 door models

Double tier models available

Interlocking modular system

Freestanding modular system

Shipped in kit form for onsite assembly

Locker width

850mm 1000mm

Price

** ***

CycleSafe® Models

EcoPark Series

EP2 Each EP2 locker unit is a complete freestanding lockerthat has 2 doors to allow access from both sides, with an interior partition to provide 2 individual secure bike spaces. Where only 1 door is required, simply lock the unused door and assemble the EcoPark EP2 locker without using the internal partition to allow secure parking for 1 or 2 bikes

ProPark Series

PP1 This single sided model has 1 door to allow access from only one side, permitting the unit to be placed up against a building or barrier. 1 or 2 bikes can be stored without an interior partition.
PP2 This double sided model has 2 doors to allow access from both sides, with an interior partition to provide 2 individual secure bike spaces.
PP1U The PP1U Model has 1 door for placement on top of PP1 Models. The locking mechanism and ID plate are located at the base of the PP1U model for easy access, and a holdback mechanism props the door open for ease of use.
PP2U The PP2U Model has 2 doors for placement on top of PP2 Models. The locking mechanism and ID plate are located at the base of the PP2U model for easy access, and a holdback mechanism props the door open for ease of use.

Options – add these additional features to the above models if requried. Please allow additional delivery time.

VTD ViewThru Doors have a 28cm x 28cm weatherproof, shatterproof Polycarbonate window to provide property managers and authorities the ability to monitor locker contents or usage for security purposes.
MSH Metal Swing Handles replace the Abloy Exec high security locks that are included with ProPark lockers. The MSH accepts U-locks and padlocks, and is suitable where cyclists are expected to provide their own lock.
Colour The standard ProPark colour is Sandstone. Custom colours may be requested for additional cost.
PosterGrip Our custom sized PosterGrip snap-in frame allows the ability to display and change information or advertising signage on ProPark end panels.

Services

Technical Assistance Cora Bike Rack provides technical assistance at no extra charge.
Delivery Via common carrier, palletised and ready to assemble.
Installation Units are shipped knocked down for easy assembly with hand tools on site. A complete step by step installation manual is provided with all orders. Allow a 2 person team, 1 hour per unit for installation.

Model

Product Info

SolidWorks 3D CAD

Order Info

EP2
2 Door

Web Brochure
 

PP1
1 Door

PDF Brochure
 

PP2
2 Door

 

PP1U
1 Door
Upper Tier

 

PP2U
2 Door
Upper Tier